 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore demand softener
I have a Kenmore Demand Softener that seems to have simply stopped. It is 12 years old and I started noticing Iron in the water.. When I checked the softener the water was near the top and over the salt. (It was 1/2 full of salt) I tried pressing the reset/ small regenerate now button with a pen but it did not regenerate. I tried changing the clock to 01:59 and waiting for it to cycle at 2:00 but it did not work. I understand the unit is 12 years old but would like to try to troubleshoot before replacing. Any ideas would be appreciated.
|
||||
Check out some similar questions!
I have a Sears Kenmore Demand Water Softener Model Number 625.3484490 Serial Number 14750 Date Code 962 ? 8 The unit is about 10 years old and I really can't afford to replace it right now. Yes, I'm capable of doing the repairs myself, just looking for a little insight before I dive in. I...
Series 300 display not functioning... stuck on time, is there anything to get unstuck?
Have a second home w/ model 70 washer that has a clogged softener dispenser. Seems to be a wax like sustance that is causing the problem. Don't know if it is because it is not used enough or if the softner was not deluted when it was used. Any suggestions on cleaning out the waxy substance?
Hello. I purchased a new-ish home (1 year after it was built) that has a model 625.388170 (or maybe 625.388180 - same manual for both) H2O softener. Until today, I had every reason to believe that all was fine with this unit. I generally do not let the salt level get very far down before refilling...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
