 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What causes Lennox Gas Pulse Funace to cycle on/off constantly
Have a Lennox Pulse Gas furnace, it is cycling on/off constantly, and making gurgling water sounds. Have already cleaned out the float valve assembly, it alleviated this problem briefly for two cycles and now its back to cycling on/off every few minutes and not producing the amount of heat it should.
|
||||
Check out some similar questions!
My Lennox Pulse propane furnace and central air fan won't shut off after the cooling cycle has ended.
Electronic unit green light flashing
I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...
My lennox pulse is not keeping my house warm enough, sounds like the fan runs constantly and can hear the furnace kick on for a few seconds at a time. What's the problem. BTW its -30* F this morning
Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
