Ask Experts Questions for FREE Help !
Ask
    sadymay's Avatar
    sadymay Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 07:45 AM
    Coleman frunace code is pressure switch but ignitor not glowing
    Furnace code is 3 flashes pressure switch but the ignitor not glowing ether does it still glow if pressure switch is not working

Check out some similar questions!

Ignitor remain glowing all the time even the burner and fan went off (trane xl80) [ 1 Answers ]

I noticed the igniter was remaining glow this morning, but the burner and fan were off this morning. I turned offt the thermostatic and the power from the furnace an hour. Then turned on the furnace again. The gas burners light up after the motor started ran and the igniter was glowed for a few...

Ignitor in dryer is not glowing, but when tested out of machine, it glowed [ 2 Answers ]

I have a Whirlpool gas dryer with a glow ignitor that isn't glowing. I went to buy an ignitor and the man at the parts store tested my old ignitor and it glowed a bright red. He told me that the ignitor was good and I did not need to replace it. I put the ignitor back in the dryer and it still...

Carrier WeatherMaker 8000 Ignitor not glowing [ 1 Answers ]

I read a post somewhere else where the ignitor did not glow. It was a result of a faulty cracked ignitor. However, I have the wonder advantage on having 2 weather Maker 8000 in my home. As a result I have swapped out all the usual suspect parts, flame sensor, ignitor, even swapped the 3 amp fuse...

Ignitor Glowing but Furnace not lighting [ 4 Answers ]

Hello, I have a Goodman Gas Furnace and I live in a townhome and each townhome has it's own meter, however there is only one regulator (external) for the building. I do not know the model number. Here are my symptions: This is an intermittent problem. The ignitor glows, but the furnace does...

Blower on and ignitor is glowing, but no gas heat [ 1 Answers ]

I have a residential Carrier model. When heat is turned on, the blower comes on and the ignitor begins to glow, but the gas heat never fires. The gas valve is definitely turned on, and our hot water heater and oven work fine with gas heat. After the ignitor glows, I can hear a hissing sound for...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.