Ask Experts Questions for FREE Help !
Ask
    donald6597's Avatar
    donald6597 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 06:09 AM
    Intertherm furnace code flashing twice
    Intertherm furnace will not fire up, first start of the season, the red light is flashing twice.

Check out some similar questions!

Concord 80 plus furnace flashing error code 6 [ 1 Answers ]

Hi, I have a Concord 80 plus furnace that lights and burns normally. The burners will kick on several times. After the cycle it shuts off and flashes error code six, system lockout. If I shut the power off it will repeat the cycle and shut down again. When I turn the power on the blower kicks on...

My carrier furnace LED light is flashing a code. How do I tell what code it is? [ 1 Answers ]

The error code is flashing and I know certain lengths, long and short indicate a code but how do I tell which one it is?

What is york furnace flashing green code [ 0 Answers ]

Changed thermostat. Now York gas forced air furnace has a flashing green code on PC board. Thermostat says heat is on, but furnace will not run. Fan will also not run in "on" position, but did earlier before setting the thermostat setback values

Weathermaker 8000 furnace flashing code 13 [ 1 Answers ]

I have a carrier weathermaker 8000 furnace ant the blower motor comes on for ninety seconds then shuts off. The control board is flashing code 13. How do I fix this.

Intertherm furnace diagnostics code [ 1 Answers ]

I have an Intertherm Furnace in a mobile home that I own and rent out. The furnace has a self diagnostic capability and shuts down periondically. The indicator lamp(red light) flashes in a series of four (4) flashes after it has shut down. I can reset it very easily by turning off and back on the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.