Ask Experts Questions for FREE Help !
Ask
    rsvoboda's Avatar
    rsvoboda Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2012, 06:19 AM
    Fire rated recessed can covers
    Hi all - I'm installing a variety of recessed lights, ceiling fans, and speakers in multiple rooms of my lower level condo. Code requires I maintain a 1-hr fire rated ceiling which means I need to have cans that are fire rated or apply a cover (e.g. Tenmat cover) that is rated. I would prefer to do everything via a 6 inch hole where my fixtures will go and not to rip out large sections of the ceiling to retrofit the larger fire-rated cans. Any suggestions?
    Thanks,
    Roger
    Hot Corn Bread's Avatar
    Hot Corn Bread Posts: 70, Reputation: 3
    Junior Member
    		  
    #2

    Sep 28, 2012, 08:35 AM
    Awright then - you got to shop for the cans with the fire rating for your situation - like those you can cover with insulation etc. Smaller cans may mean smaller watt bulbs required. LED lights are even better now days.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I use a regular recessed housing with a wet rated trim [ 1 Answers ]

So I thought I was ordering a recessed shower light (housing) with a wet / shower rated lens and steel trim ring. What I received was just the lens and trim ring (no housing) I have leftover recessed housings (IC rated) that we used in the rest of the house. Can I use one of those housings with...

Plaster and Fire rated drywall [ 2 Answers ]

I understand plaster board such as blue board is used when plastering walls instead of traditional taping/mudding of the seams, but can you plaster on fire rated drywall. I currently have the fire rated drywall in my garage due to code and am looking at just having my garage plastered.

Fire rated recessed light covers [ 1 Answers ]

I am installing Halo 4" and 6" can lights (IC) and the electrician that I am working with says that we must use UL 2 hr fire rated light covers FF109-300 Tenmat brand. First the lights are enclosed steel boxes. Does this mean that it is unecc to use the covers? Second This seems to be the only...

Can you actually bury IC rated recessed lighting in blown insulation? [ 1 Answers ]

My Lithonia Lighting L7X IC rated recessed housings spec sheet says approved for direct burial in insulation. OK, I can read, but do you guys really believe I can bury them in over a foot of blown flame retardant cellulose or blown fiberglass? If not a fire hazard, do you think the lights will...

View more questions Search