 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
This is a Lowe's private label fan. Search sites like this is a good place to start Ask.com - What's Your Question? What is your question or issue? This may help too. http://www.ehow.com/how_7178673_harb...tructions.html
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm trying to install a ceiling fan (obviously), but when I connect the wire for the light it dims as the fan slows in its rotation cycle. Even at max rotation the light is still dim. The wires from the fan are Black/Blue(light)/White(neutral)/Green(ground) ---- from the ceiling...
Hi -- my husband is halfway through installation of a Harbor Breeze Avian ceiling fan and can't figure out how to get all the 'stuff' like the remote control box back up inside the fixture to close it up. There are no instructions in the box. Can anyone explain how to do this. The wiring is done...
We purchased a Harbor Breeze 69" Airspan ceiling fan from Lowe's. It was a display model and does not have instructions included. It is already put together but we would like to change the blades from light maple side to silver side. How do you remove the blades?
I lost the instructions to our Harbor Breeze Airspan 69" fan, and just went to install it today. Have never tried to install a fan that has no pull strings, so the instructions are integral. Please help!?
I have seen something on the board about Wiring this fan type with two wires coming out of the ceiling. In this post answer the remidy was given to wire blue and black to the red and all whites to whites. My problem is I have a RED BLACK and WHITE coming from the ceiling. The fan has a White, Black...
View more questions Search
|
