Ask Experts Questions for FREE Help !
Ask
    adam38671's Avatar
    adam38671 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 17, 2012, 07:18 AM
    Troybuilt 17.5 hp won't spin
    I have a troybuild 17.5 hp brigs.. rebuilt it and put everything back together the way it come apart and now it won't spin over when I turn the key.. the starter only moves the fly wheel one tooth.. but that's only if I don't keep on turning the key.. if I qait it will spin allmost a full turn.. all wires are xorrect and even got a new starter and batter.. need my mower running please help..
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Sep 30, 2012, 04:20 PM
    Hi,
    Sounds as if the valves are not adjusted to 0.006" or the flywheel ring gear is damaged.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer won't spin just hums [ 1 Answers ]

I have a whirlpool cabrio dryer that won't spin or start, the lights on the panel come on but when you push the start button it just hums for a few seconds and stops. Im hoping it's a simple fix, I assume it can be the belt, or I have read so far on different posts with similar problems, it may be...

Ge washing machine s4200b0ww won't spin [ 0 Answers ]

I replaced the clutch and belt on ge washing macine s4200b0ww but it still won't spin. The wash cycle works, motor works, pump works. Any ideas? Thanks

Mavt546eww won't spin and noisy [ 0 Answers ]

The machine was making a grinding noise like it has a bad bearing in it. And will not spin by itself. I have to spin the drum by hand inorder to get it to spin. From what I am reading sounds like a thrust bearing. How do I get to it to find out if it is bad?

View more questions Search