 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Where to attach clutch cable to clutch assembly on PO17542ST
I have a Poulan PO17542ST tractor with a 42" mower deck. The blade clutch spring assembly has become unattached to the clutch assembly. I can't determine where the spring is supposed to attach. Can you tell me where to attach it? Does it attach to the hole in the shaft on the right idler pulley?
|
||||
Check out some similar questions!
Why do different 2-stroke engine models of the same brand of brush cutter (like Kawasaki brush cutters)have different type of Clutch Assembly? For example, a Kawasaki TD040J-AC63 Brush Cutter has clutch assembly # 13081-2218 while a Kawasaki TH034D-BT75 Brush Cutter has clutch assembly #...
Hi, I have a 2001 Toyota Echo, driving back from vacation in NH the car developed a clattering noise, I could not find the source of the noise so I took it too our local Toyota dealership & was told it was the a/c clutch assembly. Can you tell me if this is a part I can change myself ? If so your...
I have replaced clutch slave and replace the clutch master kit... tried bleeding it but there is no pressure, How do I get pressure to build... also clutch pedal is stuck and won't retract.
1991 Acura Integra with an electrical problem of some sort. Noticeable when you attempt to start the car, there are sparks seen at the end of the clutch cable where it attaches at the transmission, then smoke comes out of the clutch cable insulation and if the key is left on, the cable begins to...
I have a broken clutch cable on my Craftsman lawn tractor. I found the part on the web, but not sure if this is a DIY replacement or if I can get instructions somewhere? Not even sure where to start. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
