Ask Experts Questions for FREE Help !
Ask
    jrosec64's Avatar
    jrosec64 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 3, 2012, 02:42 PM
    Murray riding lawn mower won
    My lawnmower turns over but won't start. I replaced the fuse and it started right up and ran fine. Went out to use, and it did the same thing again. Tried a new fuse, but didn't work this time. Last summer the gas tank had a hole and leaked gas onto the wiring below it. Could the gas have done something to the wiring but I just can't see it?
    Bogies Dad's Avatar
    Bogies Dad Posts: 4, Reputation: 1
    New Member
     
    #2

    Sep 3, 2012, 04:01 PM
    Does the filter need changed? Is the gas cap vented and maybe clogged? That is what was wrong with my rider! Drain and change fuel completely, never use same fuel from last year. Check spark plug!
    jrosec64's Avatar
    jrosec64 Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 3, 2012, 05:55 PM
    Thanks for the suggestions. I have cleaned the filter, and spark plug. The gas is new cause I changed the gas tank, it had a leak in it. I will check the gas cap. I thought it might be electrical cause the spark plug doesn't get a spark. Thanks again!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won`t my murray riding lawn mower doesn't [ 1 Answers ]

My ride on lawn mower will start but it won`t move forward or backwards it is an older murray I don`t know what model it is but I do know that it is a hydro I replaced the hydro fuel then I started it but nothing happened what should I do? Please contact me at 314-520-1903 and tell me what you...

Craftsman riding lawn mower won [ 1 Answers ]

My craftman lawn tractor, model 917.276761 won't move. I have replaced the belts for the transmittion and mower deck. I checked the freewheel control. The brake is off. Am I missing something?

Ask about murray riding lawn mower [ 0 Answers ]

I have a murray select model number 425001x8 that won't start up.it a riding lawn mower

Murray 12.5 Riding Lawn Mower [ 1 Answers ]

I need to replace the belt on the lawn mower but the model number is partially missing. This is a 38" cut and an older moldel probably early 90's. How do I find out what belt I need. Any suggestions

Murray Riding Lawn Mower [ 2 Answers ]

Hi Guys.. When I crank my mower... it turns over but will not actually crank. I should start by saying that I did a "no-no". I had a weak battery and several times used my car to start (jump off) the lawn mower.. Since then I have gotten a new battery, but now it won't crank. I noticed smoke...


View more questions Search