How do I wire my 1/3 hp fan motor

Check out some similar questions!

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

How do I wire a 4 wire fan motor when the old motor was 3 wire? [ 1 Answers ]

My fan motor went bad on my heat pump. It is a ge motor with 3 wires black orange and blue. The black went to DF1 the orange and blue went to the cap. Well the ner motor I have has 4 wires. Brown, brown/white. Purple and black. The wire diagram says brown and brown/white to cap, purple to L1 and...

A/c fan motor-3 wire to a 5 wire [ 1 Answers ]

My fan motor is going out on central air, got a replacement fan they said I needed but old one was a 3 wire not this one has 5 wires. It says it can be hooked up 3 wire putting orange and purple togethor and brown and yellow togethor . Do they need spliced or what?

Wire Fan Motor [ 1 Answers ]

Where on the capacitor does the white and black wires go the capacitor is loaded

5-wire fan motor? [ 5 Answers ]

I have a Holmes Products Window Fan Model HAWF 2085T This model has two fans, two motors. These fans run 2 speeds, and are reversible for exauhst and intake. My question is how can wire one motor separate from the other, to just run at a single speed. I can control on/off with plug... ...

View more questions Search

Check out some similar questions!

Add your answer here.