 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan motor wiring 220
I have a kielman 220v single phase fan motor. I need to change the direction the fan runs in. i see 4 wires from the motor. One is ground one is not connected(has 2 black wires) one solid wire and the other (also 2 wires) blue grey. The 2 hot wires are connected to the solid and the blue/grey wires what do i need to do to change the direction of the fan?
[email protected] Thanks for the help |
||||
Check out some similar questions!
I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. It has been determined that it is the fan motor. I went and bought a new one but this motor comes with 4 wires (Black, White, Brown and Brown with White stripe). The old motor came with three wires which were Purple,...
I purchased a Dayton 4M205G fan motor to replace the original motor in my Armstrong AC. I also purchased a new capacitor. The original A.O.Smith motor had 3 wires. The new Dayton, and the replacement from A.O.Smith, both have 4 wires (plus the rotation and ground wires). Do both brown and...
The model is Carrier 42JS012. Can anyone tell the air-cond fan motor wiring? The are 5 wires which is Red, Yellow, Blue, Black and White. Which wire is connected to the capacitor and which is connected to fan speed? Thanks
I have a Dayton 1/3 H.P. motor Model no. 4M099C. It is a 220-230 volt motor. There are four wires coming from the motor. The purple is marked common, the black marked high, the blue marked med. And the red marked low. I want to connect these to run on 220. How do I go about connecting common and...
Just bought a new fan motor for my a/c & it has one more wire than my old one did. Need help installing.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
