Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
New condenser fan motor wiring
 [ 2 Answers ]
 We just installed a new condenser fan motor (A.O. Smith OYK1028) and are feeling a bit lost with finishing up with the wiring. Both the old and the new motors (this is an OEM replacement) have three wires: purple, brown, and black. We did not remove the old motor, so we did not see how the wires... 
Wiring a 220 volt fan motor
 [ 1 Answers ]
 I have a Dayton 1/3 H.P. motor Model no. 4M099C. It is a 220-230 volt motor. There are four wires coming from the motor. The purple is marked common, the black marked high, the blue marked med. And the red marked low. I want to connect these to run on 220. How do I go about connecting common and... 
Wiring new fan motor
 [ 10 Answers ]
 Just bought a new fan motor for my a/c & it has one more wire than my old one did. Need help installing. 
Wiring of a Rheem Condenser fan motor
 [ 1 Answers ]
 The motor looks to have 2 orange wires, 1 black wire, and 1 brown wire. Where do they go back to. Do the 2 orange wires go to the capacitor? Black go to contact + and brown to common? The 2 orange wires have continuity between them with no or little resistance. Are these both ground wires or... 
Wiring Outside A/C condenser Fan Motor
 [ 1 Answers ]
 
Need help wiring a new outside a/c condenser fan motor. Old fan motor has 3 wires: black, blue, light orange. Black to one side of contact, light orange to other side. Blue to capacitor. Contact has 5 connectors.. one side: black from motor, black to inside the condenser. Other side: dark orange... View more questions Search 
  |