Ask Experts Questions for FREE Help !
Ask
    davids1989's Avatar
    davids1989 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2012, 05:17 PM
    What's the degree of duct board elbows
    I would like to make angled boot per-say 90 degree or a 45 degree. What would be the angles I need to cut to make them come out right. I would practice but wasting duck board and time is not for me. Any one have the answer, would appreciate the answer. Thanks

Check out some similar questions!

My elbows began to get sore and now I'm tingling from elbows down to my finger tips [ 5 Answers ]

What does it mean when you elbows get sore and then you get tingling down to your finger tips

Can I replace 12x8 cold air return duct with 12 inch flex duct in my basement? [ 2 Answers ]

I need head room in my basement and want to take down the old cold air return metal duct work 12x 8 and re-route to the plenum with 12"flex duct. Will this be a problem with the furnace working properly? Please advise

Show me technics to cut duct board [ 1 Answers ]

How can I cut a fiberglass board to reduce from 17" to 14" duct

I have SS duct (HVAC) to be connected to a Galvanized steel duct. Do I need dielectri [ 1 Answers ]

Do I require dielectric washers to join the SS duct to Galvanized steel duct in HVAC duct network?

Installing fiberglass duct board? [ 2 Answers ]

I have about 36" of metal air duct missing in my basement. There's metal air duct coming from the supply then a missing section, then a 45 degree elbow and a metal run going up to a room. I have a few questions about replacing it. 1.) Can I use fiberglass duct board to replace it? Is it OK to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.