Ask Experts Questions for FREE Help !
Ask
    kdoyle1's Avatar
    kdoyle1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2007, 04:06 PM
    Hot water from washing machine.
    My wash machine works with cold water but has decided not to let the hot water work.
    The faucet is turned on, I've changed the hoses, but still no hot water? The machine works only in cold -- any ideas on hot to get the hot water flowing again?? Thank you.
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
    		  
    #2

    Mar 7, 2007, 05:05 PM
    There is a screen inside the inlet where the supply hose connects to the machine.

    Pull the screen out with a bobby pin and rinse it out under warm water in the sink.
    stew_1962's Avatar
    stew_1962 Posts: 255, Reputation: 10
    Full Member
    		  
    #3

    Mar 7, 2007, 05:05 PM
    Take the hoses back off, there are screens in the valves on the back. Clean them. Let us know if that's your problem.

    Regards,
    Stew
    stew_1962's Avatar
    stew_1962 Posts: 255, Reputation: 10
    Full Member
    		  
    #4

    Mar 7, 2007, 05:06 PM
    HAHAHA, we answered that one at the same time.
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #5

    Mar 7, 2007, 09:06 PM
    When you clean the screen on the hose inlet on the machine let us know what color it is.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water In Washing Machine [ 3 Answers ]

i'm not getting hot water to my washing machine, but everywhere in the rest of the house its fine. What do i need to do?:confused:

Washing machine - low hot water pressure. [ 4 Answers ]

First of all - Hi every one. I have a hotpoint washer which reports an error after 15 minutes. E11 check water supply. I have looked into this error and it means there is no (not enough) hot water after 15 minutes. I do not know if it is coincidental but I fitted a (replacement) new shower...

No water in washing machine [ 3 Answers ]

Washing machine was working an no water comes in. Anyone explain this?

No water to washing machine [ 1 Answers ]

When we try to run our Smeg washing machine we get an error message that there is no water supply. However, the pipes are all clear and the water is flowing (and the filters are clean). We were told that the circuit board needed replacing. Is there not just some way I could re-set the machine? ...

No hot water in the washing machine [ 1 Answers ]

:confused: The hot and cold lines leading into the washer are OK, but for some reason the washer only runs cold. Not warm or hot? What could be the problem?

View more questions Search