Ask Experts Questions for FREE Help !
Ask
    Frankie0306's Avatar
    Frankie0306 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2006, 06:18 PM
    No Hot Water In Washing Machine
    i'm not getting hot water to my washing machine, but everywhere in the rest of the house its fine. What do i need to do?:confused:
    Texas Tom's Avatar
    Texas Tom Posts: 46, Reputation: 4
    Junior Member
    		  
    #2

    Dec 5, 2006, 06:42 PM
    Quote Originally Posted by Frankie0306
    I'M NOT GETTING HOT WATER TO MY WASHING MACHINE, BUT EVERYWHERE IN THE REST OF THE HOUSE ITS FINE. WHAT DO I NEED TO DO?:confused:
    Disconnect both ends of the hot water supply hose. On the end of the hose where it connects to the water supply, look & see if there is a wire strainer. The strainer may be clogged. Also look at the hot water inlet to the washing machine. There may be another strainer that needs cleaning.

    If that's not the problem, it's probably the solenoid water valve that's corroded & not opening properly.

    Cheers, Tom
    obouhaddou's Avatar
    obouhaddou Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Feb 6, 2007, 04:25 PM
    Quote Originally Posted by Frankie0306
    I'M NOT GETTING HOT WATER TO MY WASHING MACHINE, BUT EVERYWHERE IN THE REST OF THE HOUSE ITS FINE. WHAT DO I NEED TO DO?:confused:
    Did you find out an answer to your question. I have the same problem with my washing machine Whirlpool. I can wash with cold water but when I turn the knob to hot water the machine stops working. Thanks.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Feb 6, 2007, 04:43 PM
    We have had a rash of complaints about hot water lines freezing up the last couple of days. Are you guys sure you're not froze up? Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water in washing machine [ 3 Answers ]

Washing machine was working an no water comes in. Anyone explain this?

No water to washing machine [ 1 Answers ]

When we try to run our Smeg washing machine we get an error message that there is no water supply. However, the pipes are all clear and the water is flowing (and the filters are clean). We were told that the circuit board needed replacing. Is there not just some way I could re-set the machine? ...

No water in washing machine! [ 2 Answers ]

Hi My washing machine was working fine, its Simpson Esprit 700, heavy duty. But from last 2 days it can't get any water from hose when I turn it on.I hear the motor is running and there is water on the tap and the hose is not clogged.For some reason the machine is unable to get water inside. Any...

Washing machine water troubles [ 4 Answers ]

Hi just a question to see if anyone could help as to my problem with my washer. The last few days when running washer (cold water only) the water seems to take a very long time to fill. When the switch if flipped to warm/cold or any other combo. The water comes out fine. Just on cold cold does...

No hot water in the washing machine [ 1 Answers ]

:confused: The hot and cold lines leading into the washer are OK, but for some reason the washer only runs cold. Not warm or hot? What could be the problem?

View more questions Search