 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What happens if the supply and return pipes from the chiller have been cross connect
. What happens if the supply and return pipes from the chiller have been cross connected when they were installed to an Air Handler? The handler is creating a cool flow but the compressor is beginning to show signs of distress.
Should I have the pipe connections corrected? |
||||
Check out some similar questions!
I'm doing a rough in for a powder room and am at the point of installing the supply lines. I understand the preferred way to do this is with drop eared els and nipples that will eventually connect to the shutoffs. I see two issues with this method: 1) how can I be sure the threaded connection...
I need the replacement models for Honeywell model vr8204m2909
I inadvertently connected a serial port on an older Dell D300 to the s-video on a newer (to me) Inspiron 5160. Now my usb ports are not working. I ran every diagnostic I could find, and everything says it is operating perfectly. I tried 4 different devices, and the computer does not recognize...
I'm installing a new pedestal sink. How close to the wall do I cut the copper supply stub outs? I would like to make it as attractive as possible by coming close to the wall, but don't want to burn down the house in the process. Thanks - Dennis
I own a building that was originally a single family home but was divided into 3 units (long before I purchased it). There are 2 water heaters that service the 3 units. For the past few months the tenants in the top floor unit have been complaining that they aren't getting enough hot water. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
