 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I installed a Harbor Breeze wall control.Now mthe light blinks.
I installed a Harbor Breeze wall control with a Harbor Breeze ceiling fan. It worked fine for 4 days. But now the light on the fan blinks randomly when its turned off. I tried different codes thinking something else was being used with a similar freq. but nothing helped. Any Ideas would help.
|
||||
Check out some similar questions!
I recently bought a Harbor breeze universal ceiling fan and light wall control for my existing wired fan. The existing wiring was two on/off switches (1 for the fan, one for the lights). The cable used in each case has a black wire, a gray wire, and a ground wire. When I hooked it up, the light...
I bought a harbor breeze universal ceiling fan & light wall control requires 3 wires. Well my wall only has 2 can I still use it and how?
Hi -- I have hooked up a ceiling fan to work from two of the Harbor Breeze remote universal wall control units (the kind that only require 2 wires). My problem is that I had no place on the remote to hook up the red wire which is the “traveller" wire between the two switches. There are 3 wires...
I bought a Harbor Breeze fan that came with a remote. I also bought the wall control kit WC100L (Wall Control Kit) My understanding is that the wall control is a remote that transmits to the fan (the kit includes a receiver that gets installed in the fan that gets coded similar to the remote -...
Just purchased a Harbor Breeze Triton fan at Lowe's. It came with a remote. I purchased a spare remote, and a wall unit. The thing is, even though the dip switches are ALL set EXACTLY the same, I can never get more than ONE of the controls to work! If I install the transmitter from the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
