Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Harbor breeze remote control fan light does not work
[ 13 Answers ]
My harbor breeze fan light does not work with the remote or wall control. We have replaced the receiver, rehooked it up to all the wires coming from the house but only the fan works. We can control the fan speed. When we press the light button on the wall and remote it flashes red. Please...
Universal Wall Control Harbor Breeze Fan
[ 5 Answers ]
Hi -- I have hooked up a ceiling fan to work from two of the Harbor Breeze remote universal wall control units (the kind that only require 2 wires). My problem is that I had no place on the remote to hook up the red wire which is the “traveller" wire between the two switches. There are 3 wires...
Harbor Breeze remote & wall control both?
[ 3 Answers ]
Just purchased a Harbor Breeze Triton fan at Lowe's. It came with a remote. I purchased a spare remote, and a wall unit. The thing is, even though the dip switches are ALL set EXACTLY the same, I can never get more than ONE of the controls to work! If I install the transmitter from the...
Harbor breeze fan / Dimmer switch wall control
[ 1 Answers ]
Hello. I recently purchased a Harbor Breeze ceiling fan and a light/fan dual dimmer switch from Lowe's. We had both installed and it seemed to have worked fine for a week. Then I smelled something that smelled like burning copper(?) and realized that it was the switch that was installed in the...
Harbor Breeze Universal Remote Control Wall Unit
[ 3 Answers ]
I was wondering... I have purchased in the past about 3 "sets" of the Harbor Breeze Remote Control Wall Units where you have both a remote control that controls the light and/or ceiling fan, and also a wall unit (that you put in place of your regular light switch) that can also be used to operate... View more questions Search
|