 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Compressor cranks for 2 seconds and stops
The compressor fan works fine, and cycles on when the thermostat goes to cool.
The compressor cycles on for 1-2 seconds, then shuts off (fan continues to run). It then tries to cycle again about 1 minute later for 1-2 seconds, then shuts off. I have changed the relay and start cap. It still does the same thing. Please help... |
||||
Check out some similar questions!
Replaced 24 volt control xformer; new sequencer;elemets check good. What else to check?
Changed the battery fuel filter next is a seafoam in the gas tank vacum line and crankcase any ideas about the cold cranking problem would help it only cranks for a while when cold other times when warm it fires right up... thanks you in advance
I have a tecumseh engine that is 5 years old and always ran well. The 3rd time I went to start it this year it started good but stops in 5-10 seconds. There is a new spark plug and air cleaner. I have tried to start it more than 12 times now with same result.
I have a 6 year old Murray Select lawn mower with a 6.5 Briggs & Straton engine. The engine cuts out after a few seconds after I prime it. I had the same problem last spring so I had the engine serviced, they tuned it up, replaced the gas line and put fresh gas in. I am having the exact problem...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
