Ask Experts Questions for FREE Help !
Ask
    tmngawaka's Avatar
    tmngawaka Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2012, 10:01 PM
    Samsung sw95asp washer making a lot of noise during cycle and isn't spinning properly.
    After machine is filled it makes a funny noise when washing,then when it goes into spin cycle its not spinning the clothes its throwing them from one side to the next which brings the machine up uneven?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 17, 2012, 10:13 AM
    Here are some manuals: https://dl.dropbox.com/u/8010163/Maytag%20Washers.zip
    You need to pop the top and remove the back so you can see inside. It should be immediately obvious what is wrong. Here is a manual on how to understand how it works: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    Probably one of the balancing weights has broken, or a spring has come loose or broken from rust or rusted out mounting hole.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Maytag HAV2558AWW washer has started making a loud noise during the spin cycle [ 0 Answers ]

It is only making the noise at the start of the spin cycle. As it picks up speed, the noise goes away, but it is very loud initially.

My washer is making a loud noise when spinning [ 1 Answers ]

When my maytag washer is on spin cycle, it sounds like it's going to take flight. It hasn't always done this. What is wrong?

Samsung triflow sw95asp washing machine troubleshooting [ 0 Answers ]

Hi there My washing machine makes a loud noise towards end of rinse and spin cycles. Sounds like the barrel is ready to fly out. Help

Whirplool ultra care ii washer stopped spinning and making a grinding noise [ 0 Answers ]

I have a Whirlpool Ultra care II washer, model LSQ9659LW1. It was going into rinse cycle, stopped and began making a grinding noise. I stopped the washer and let it sit, then started back again with no change. The washer is sitting with a full load of laundry. Thank you in advance.

View more questions Search