Check out some similar questions!
Lennox HS29-048-1P condenser fan motor replacement
[ 3 Answers ]
Fan is not bad, but when I had freon levels checked service guy said the seal had failed and fan could last two years or two days. Called Grainger with the OEM part # and they matched it with a Dayton 4M206J and a 7.5 mfd 370VAC capacitor. I am pretty handy and seemed to be a simple task. Was...
Lennox 10ACC-042 high pitched sound from outside unit when system is not active
[ 0 Answers ]
I have a Lennox 10ACC-042 split-system central air conditioner. I had a checkup/tuneup performed on it last month and everything was great. Also it is cooling fine, no problems there. The problem is, after it has finished running and is not active then after some period (ranging from a few...
Lennox 10ACC-048-230-02 - Condenser fan not working - intermittently
[ 2 Answers ]
When the unit is turned on, everything functions perfectly. After running the unit approximately 30 minutes, the condenser fan stops working. If the air conditioner system is turned off for awhile (a reset), then the system works well for 30 minutes, then the condenser stops running. I replaced the...
State Select electric water heater, reset button will not reset... HELP!
[ 0 Answers ]
Our old water heater finally quit. We were given a 3 yr old State Select electric water heater and my husband is installing it. It seems the reset button will not reset. There is power to the top element, but when he checks the bottom element... no power! The reset button seems to be unable to...
I have an older Lennox gas forced air heater and cannot seem to locate a reset button
[ 1 Answers ]
I have an older Lennox gas force air heater and cannot seem to locate a reset button. I have power to the unit but an not getting any results on heat! I have replaced the gas valve due to a buzz sound and no heat, I have replaced the thermostat transformer but still no heat!! View more questions Search
Add your answer here.
|