 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor bay miramar troubleshooting
I have a Harbor Bay Miramar ceiling fan which works SPORADICALLY... when I turn the power switch on, the upper lights flash. Sometimes, the fan will respond to the remote and the fan comes on; sometimes not. What can be done to fix this? BTW, I can only turn the upper flashing bulbs off when the fan is running!
|
||||
Check out some similar questions!
My relatively new Harbor Breeze ceiling fan was working fine until a few months ago. When we turn on the fan/light from the wall switch the lights blink. Sometimes we can get it to stop by pulling on the pull chain a few times. It's rather annoying and happens often. Please help.
I have two of the same harbor breeze ceiling fans with remote controls. One of the remotes is missing. Why can't the other remote work for the this fan?
Purchased a Harbor Breeze 52" model very similar to the Elevation Brushed Nickel. The batteries went dead in the remote and after replacing them there is no communication between the remote and the fan.the dip switches match. Any suggestions?
I have gone through 3 receivers on this fan as they fry after about a year. This time I attempted to bypass the remote and just use the wall switch to turn the fan on and off. My house is 55 yrs old so it only has the one (Black and white ) wire plan. Well everything went well as the Miraramar has...
I have a harbor breeze ceiling fan that has a remote and no pull chains it was working fine until I blow a breaker in the room, fan works but light won't come on. Changed all three bulbs one was blown and just got a little flicker in one or two light bulbs but light still won't work help please
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
