Ask Experts Questions for FREE Help !
Ask
    dpaycheck's Avatar
    dpaycheck Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 1, 2011, 09:38 AM
    Harbor breeze ceiling fans troubleshooting?
    Purchased a Harbor Breeze 52" model very similar to the Elevation Brushed Nickel. The batteries went dead in the remote and after replacing them there is no communication between the remote and the fan.the dip switches match. Any suggestions?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Sep 1, 2011, 09:56 AM
    Do you get a small red light on the remote when you push a button? I will assume no wall switches so check the breaker first and then open the canopy to confirm 120 vac getting to the feed side of the receiver.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor breeze ceiling fans troubleshooting? [ 3 Answers ]

I have two of the same harbor breeze ceiling fans with remote controls. One of the remotes is missing. Why can't the other remote work for the this fan?

Harbor breeze ceiling fans troubleshooting? [ 2 Answers ]

I have had my Harbor Breeze Fan for approximately 6 years. Recently it started making a noice (like loose bearings - if that makes sense to you). Suddenly, my fan stopped working. The lights inside the casing and in the light kit are working but the fan doesn't work at all. I love the fan and...

Harbor breeze ceiling fans troubleshooting [ 3 Answers ]

I have a Harbor Breeze Armitage ceiling fan that was installed about 2 years ago. Several weeks ago, I turned it on at the wall switch as usual. Athe light came on but the blades do not move. I hear a humming noise when it is turned on. I have read about a "capacitator" part that may need to be...

Harbor breeze ceiling fans troubleshooting [ 2 Answers ]

I have a harbor breeze ceiling fan that has a remote. I connot use the remote to turn on the ceiling fan or lights. I can still turn the light on with the pull chain, but the ceilling fan and the light are on, I got flicker on the light bulbs. Please help.

Harbor breeze ceiling fans troubleshooting [ 5 Answers ]

Our fan and light worked fine up to about three months ago when the light stopped working. I removed the bulb, thinking it needed replacement but it looked fine. It was tested at the hardware store and they confirmed nothing is wrong with it. Remote shows ability to adjust level but nothing...


View more questions Search