Ask Experts Questions for FREE Help !
Ask
    madmacs111's Avatar
    madmacs111 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2012, 06:07 AM
    Help with non-spinning Kenmore washer 110.24832200
    Works great till spin cycle. It drains then makes a loud noise when its supposed to spin. Gear shot? Help!
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 7, 2012, 10:21 PM
    These will help: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    https://dl.dropbox.com/u/8010163/Whi...%20washers.zip
    You will need a good meter to check out this washer. You cannot diagnose it any other way. Most likely you have a bad solenoid that controls the spin cycle. The solenoid should read between 500 - 3000 Ω.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 110.24832200 washer agitator not spinning, making [ 2 Answers ]

The agitator motor is making a grinding noise. Maybe the gear shaft is not engaging the center agitator? Could the gears be stripped? The washer is about 9 years old, but has been moved around in storage for the last three years. It worked fine when we put it away. I was a little rough on it,...

My kenmore washer model number 110.24422300 is not spinning on the spin cycle [ 0 Answers ]

My kenmore washer model number 110.24422300 is not spinning on the spin cycle. The water is draining but it is not spinning. It spins sometimes, but other times I spin it with my hand to get it started. Sometimes it works and sometimes it doesn't. It is making the noise like it is spinning, but...

Kenmore washer 110.26842694 agitates, stopped draining & spinning on some, then all. [ 0 Answers ]

My Kenmore washer, model #110.26842694 was filling and agitating just fine, but only draining on some cycles, then it stopped draining and spinning altogether. Thanks,

Kenmore Wash 110.24832200 not agitating properly [ 1 Answers ]

My Kenmore washer model # 110.2483220 is not agitating properly. It is still agitating but not like it should. When I press down on the agitator it works again, when I lift it, it skips. Can you tell what is wrong and how to fix it? Thanks Michelle

Kenmore Washer, Model No. 110.24832200, Stopped Spinning and won't drain [ 1 Answers ]

I have a Kenmore 80 Series, Model No. 110.24832200 washing machine. It goes through the cycles fine, but when it comes to spinning and drainig the water, it won't function properly.

View more questions Search