Check out some similar questions!
10KW Emergency Back-up Generator
[ 1 Answers ]
I installed a 10KW Back-up Elton Generator with an automatic switch servicing my entire 200A residential service. I realize that even under most circumstances that my service seldom exceeds 50% capacity. Now, the electrical inspector has requested a load calculation summary as to why I chose a...
Are there devices that converts low speed high torque input to higher speed lower to
[ 3 Answers ]
I know transmissions, gearboxes and reductors convert high speed low torque input to lower speed higher torque output but are there devices that do the opposite?
Elmark ceiling fan stop on low speed mode
[ 2 Answers ]
Hi,why does my elmark ceiling fan(basic 48' 3 blade type)stop on low speed 1 & 2.It works well on high spped 3 & 4.kindly advise, thks:)
Bryant Furnace won't start flame on my emergency generator
[ 4 Answers ]
My newer Bryant plus 80 T gas furnace would not start the flame when it was connected to my emergency generator during an ice storm that caused the commercial power to go out. Is this a result of the poor power quality of the emergency generator which messed up the electronic circuits of the... View more questions Search
Add your answer here.
|