Ask Experts Questions for FREE Help !
Ask
    psouth's Avatar
    psouth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 4, 2012, 12:23 PM
    Mtd 13AH660F120
    I have MTD Yard Machine, 12.5 hp, 38" cut and looking for the fuse that controls the ignition. Where do I find it? I have replaced battery and Still do not make a connection when I turn switch. Could problem be in switch itself or would the fuse be a more likely solution?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Aug 4, 2012, 02:55 PM
    Does not appear to be a fuse for ignition (usually isn't). Problem is likely to be in one of the safety switches or ignition switch itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mtd won't go in reverse [ 1 Answers ]

MTD model tracker won't go in reverse while on ground. Once lifted reverse work's. Is it the brake system, some obstacle, or adjustment. Thanks,HLF

Mtd troubleshooting [ 1 Answers ]

I have an MTD series 600 tractor with a 46" cutting deck. I just purchased a snow thrower, part nr 190-032 for the tractor. I ran into trouble with step one which is a detrerminate of Electric PTO vs Manual PTO. I have a manual PTO and the step one procedure is to locate the PTO Cable. It...

MTD Turns over once [ 5 Answers ]

I thought it was the battery the whole time but it isn't. I checked the battery & it has 12.85 amps. The engine will only turn over once & when it does it seems slugish it then will do nothing until yo uturn the key off & then back on & the process begins all over again. I did this so long that the...

View more questions Search