Ask Experts Questions for FREE Help !
Ask
    DavidBluetree's Avatar
    DavidBluetree Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 4, 2012, 10:37 AM
    Wiring question for a small pump
    Iam replacing a small pump for my birdbath. The wiring that is present is green/yellow, blue and brown. The wiring for the new pump is green, black and white. How should I match these up?
    fuseman's Avatar
    fuseman Posts: 11, Reputation: 4
    New Member
     
    #2

    Aug 4, 2012, 09:31 PM
    Send model # and product name.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Aug 5, 2012, 02:41 AM
    Where are you located? If the building ,or permanent wiring is blue and brown indicates your located outside of the USA.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a small electric stove [ 1 Answers ]

I am putting in a small electric stove I have lots of space in my breaker panel for additional circuits. The stove is about 75 feet from the panel. It is a 220 stove. What wire type/size should I use? What breaker size? The area in unfinished so I can wire along/thru the ceiling joists. Also how...

Small Wiring diagram [ 1 Answers ]

Hi people, I hit the wall and I can't seem to figure this one out. My pet project is a small guitar pedal... Gutted and refit to switch from A to B when the switch is activated. So I can have 2 guitars plugged in and just hit the pedal when I change instruments. The unit works fine, but I can't...

Trane Heat Pump tstat replacement with Honeywell prog - wiring question [ 1 Answers ]

I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...

Small Question [ 2 Answers ]

Umm... (I must sound like an amateur) In SUVAT equations... How can you tell when a displacement has to be negative or positive..? Like when freefall... is the displacement +ve or -ve :-[ (if down is considered +ve) And when you throw something up (considering up as positive) is...


View more questions Search