Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My New Cambridge Electric Fireplace(stove) Squeaks
[ 11 Answers ]
Just got myself a Cambridge Elecrtic fireplace, and when I have the lights on (flames) I can hear a sqeak squeak, like a wheel having to turn. I no nothing about Electric fireplaces, and I'm wondering if they're suppose to squeak when the fake flames are going. It's very distracting, and I'm...
Electric Stove + 30 Amp Breaker?
[ 19 Answers ]
Hello, I am installing a 20" electric stove in a "Granny Unit"... The stove is going where there used to be a dryer. The wiring (for the dryer) is there including a 30 amp breaker. Does a stove of this size need a 50 amp beaker? Or, can I use the existing 30 amp breaker? I want it to be safe...
Stove wiring - maximum run length, can use junction box?
[ 2 Answers ]
Hi, I am moving kitchen from one part of house to other side. In the process, will be moving the stove. Naturally as per Murphys law, the panel is on the opposite side of the house and to connect the stove, I would have to run 50 to 60 ft of stove wire. Is there a maximum length you can run...
Electric stove
[ 1 Answers ]
I have a gas stove which is a 20 amps and I have it plugged in to the wall. A few days ago I noticed that there was a pop noise in the kitchen and the stove went out. There is no electricity where I had the stove plugged in. I went outside and switched the breaker off and on that applied to that...
Installing a Electric Stove/Oven
[ 2 Answers ]
I'm installing an Electric Stove/Oven unit that is not up against a wall. There are cabinets on either side of the stove and a counter for eating behind the stove. I have my wire coming up through the floor behind the stove for the plug. The stove has a downdraft exhaust fan (exhaust fan is under... View more questions Search
|