 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a York YP9C modulating furnace and matching York Affinity 8T 4 ton 2-stage condensing unit. The units are working wonderfully with no problems in the cooling mode. I have not used it for heating yet, so I do not know how it works in the heating mode. The furnace fault light shows a green...
Furnace seems to run normal, but every once in a while blower motor keeps running and I have to turn off ac switch to stop. Error code in memory, 5 red flashes. Rollout switch. Furnace will now run normal for a while, slow green flashes, then slow amber flashes when furnace is operating,...
I have a York furnace and the blower is not coming on. The diagnostic fault code light started with 4 blinking reds which describes it as the limit swith is open. Now diagnostic fault code light is blinking 11 times which describes it as limit switch open - blower failure. I had the furnace off...
I have a 13 yr old York Diamond 80 gas furnace with a Johnson Contol board. After running for some time the system shuts down and won't come back up. The error code is solid on. If I power cycle the breaker switch the unit comes right back up. Is this error code that the controller is failing? BTW,...
A/C condenser red right is blinking 6 times pause and blinking 6 times - the inside therostat light also is blinking the same code in the emergency heat light - does anyone know what this means??
View more questions Search
|
