 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York furnace Johnson controls error codes
I have a 13 yr old York Diamond 80 gas furnace with a Johnson Contol board. After running for some time the system shuts down and won't come back up. The error code is solid on. If I power cycle the breaker switch the unit comes right back up. Is this error code that the controller is failing? BTW, The blower motor is brand new. Any help is greatly apprciated.
|
||||
Check out some similar questions!
I have a York YP9C modulating furnace and matching York Affinity 8T 4 ton 2-stage condensing unit. The units are working wonderfully with no problems in the cooling mode. I have not used it for heating yet, so I do not know how it works in the heating mode. The furnace fault light shows a green...
We have a Carrier 58PAV and the Red LED light is on. Furnace makes a high pitch noise when starting up. We are having trouble understanding the directions provided in the manual to do the component test. Instruction manual says to "To initiate the component test sequence shut OFF the room...
Mdl number p20pd12n08001b The vent motor comes on but it doesn't fire up The led flashes 4 times.
Need to find a list of error codes for a trane model YCX 024 F 1 MOAE. Serial # K10163642 I do not have the papers on this model.
Hello! Please! Help. I would like to get (Johnson Controls CSA49A-600R wiring diagram) Thank you so much. John
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
