Ask Experts Questions for FREE Help !
Ask
    ShaneIn wi's Avatar
    ShaneIn wi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2012, 09:39 AM
    Hunter ceiling fan
    I have a black and white coming out of box. No ground. I hooked white to white and black to black along with black and white tracer. I keep blowing the fuse
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Jul 29, 2012, 12:56 PM
    Are there two switches on the wall by the door? If so, I would think that one would be for the fan and the other for a fan light.

    If my thinking is correct, then just remove the black & white tracer wire and cap it off. You'll be left with white to white, black to black.

    Hope this works for you,
    WallyH
    mike 165278's Avatar
    mike 165278 Posts: 168, Reputation: 7
    Junior Member
    		  
    #3

    Aug 1, 2012, 05:28 PM
    What model fan? Does it have a receiver or pull chain? Light kit?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter fan ceiling fan remote override wiring [ 0 Answers ]

Hunter ceiling fan with light; wall switch has one switch that goes to light and one switch that goes to fan. There is one white wire and one black wire coming from switches into fan receiver. There is a blue and white wire going from receiver to light. There are 4 wires going from receiver to fan,...

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in [ 1 Answers ]

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in one... I can get the light to work on the dimmer and or the fan and light on the dimmer but not the fan to work on the fan switch... I don't know where the blue wire coming out of the switch goes ...

Fan and light in Hunter ceiling fan stopped working [ 7 Answers ]

I have a Hunter ceiling fan with four lights. Then without anything unusual happening the fan and lights simultaneously stopped working. I operate the unit using a wall switch. When I turn the switch to "on" I can hear the unit beep so I know that power is going to it, but when I press the fan or...

Hunter Ceiling Fan - replacement Fan and Light Control Capacitor Model # 27185-060 [ 1 Answers ]

I need this replacement part (part number 84368-060) and do not know where to locate one. I have looked on web sites to no avail. Any ideas??

Fan switch on hunter ceiling fan model #20537 not working. [ 1 Answers ]

The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1

View more questions Search