Ask Experts Questions for FREE Help !
Ask
    jimmyd's Avatar
    jimmyd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2007, 09:14 PM
    Trane Xl80 Furnace
    Hi,
    Keep getting the blinking light on the control panel. Flashes 4 times it say's it means that the thermal protection device is open. O.K. what does that mean . And can I fix or do I have to call a repair man
    Thanks
    Jimmyd
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Mar 5, 2007, 04:00 PM
    Go here.

    https://www.askmehelpdesk.com/heatin...tml#post269193

    And here.

    https://www.askmehelpdesk.com/heatin...tml#post269282
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XL80 TUD100R948K furnace [ 4 Answers ]

I have a Trane XL80 2 stage furnace just installed and in the manual it mentions that the blower motor speed can be adjusted by the spped taps wiring. It has 4 wires black, yello, red and blue. And there is a terminal called "PARK". Which has the yellow wire connected to it and then RED to LO HEAT...

Trane XL80 Heater Unit [ 4 Answers ]

We had a Trane XL80 Heater and XL 12 AC Condenser installed back in Jun 2004 - The blower fan on the heater is starting to make some noise! Not sure if it's getting ready to go out? Or not - also we had a Sta-Med Electronic Air Cleaner installed at the same time - the power light (green) does not...

Trane XL80 blower problem [ 3 Answers ]

I have a Trane XL80 furnace, about 16 years old, with heat only setup. After we turned on the heat, the pilot fire came on, then the furnace lit and the heats up, however the blower wasn't turning and not blowing air. We opened both doors, saw the fan limit (a little round dial with setting to...

TRANE XL80 blower stopped turning [ 1 Answers ]

Hi I have a TRANE XL80 Furnace. Couple of days ago the furnace “Blower” started to make humming and grinding noise and it wouldn’t turn. I then would give it a push start by turning it by hand, and it would turn for couple of hours and it would do the same thing. An hour ago, it stopped...

View more questions Search