 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
American Standard Arco-Flame
We ran out of oil so the oil burner needs to be bled to restart. It's an American Standard Arco-Flame Oil Burner, Model DH-5F Series F-1 . I used to do it on my old burner in the house I used to live in but I can't figure out even where you bleed it from. I can't afford to pay anybody to do it. We put dieael in the oil tank because I can't afford that either. Can anybody tell me how to do it ?
|
||||
Check out some similar questions!
How to remove shower valve american standard
Can the old Mexican version Incesa Standard wall mounted toilet be replaced with the new elongated version of the wall mounted American Standard toilet? Making sure both fits are standard connections... sizes, etc. I've heard 4" center and 4 1/2" center from floor. What do I need to be aware of...
I have an American Standard Freedom 80 Single Stage downflow gas furnace, Model #DD060C936F. I noticed it is blowing cold air after a power failure, the error light blinks 4 times. I opened the panel I saw the ignitor lit but burner won't come on. After a week it's working pefectly fine for a...
I took my American Standard Stem in to the Home Depot. They compared to to others and said that it was a 2C-14C. Then they gave me replacement Nu-Seal washers and said that there is no seat for this. Is that possible? Here it is with the new washer attached.
I replaced the actuator(flapper) on a 17 year old american std tank and it keeps bouncing up & down as it tries to seal. At first I though it was from the waves made as water fills the tank, so I tried slowing down the rate of flow into the tank. But the problem persists. Any help or suggestions...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
