Ask Experts Questions for FREE Help !
Ask
    mad4ponies's Avatar
    mad4ponies Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2012, 07:08 PM
    1991 Honda Civic code 10 and 16
    Working on my daughters car. We have changed the fuel pump, fuel filter, coil, injectors, main relay and I am still having problems with rough running and stalling. Please any advice will be apprieciated. I have considered it might be the air intake tempature sensor too but I don't want to keep changing sensors with out confirmation and waste more money.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 22, 2012, 04:33 AM
    The rough running and stalling will likely be solved by replacing the Ignition Control Module (ICM) inside the distributor. Be sure to apply silicone heat transfer grease to the back of the new ICM. If the distributor cap and rotor haven't been changed in 60,000 miles, this is a good time to do it. High resistance in these items often destroys the ICM. You also want to verify that the Check Engine Light consistently comes on for 2 seconds and then goes out, when the ignition switch is turned to ON (Position II).
    mad4ponies's Avatar
    mad4ponies Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 22, 2012, 02:27 PM
    The check engine light has never come on. And we did change the rotor and cap when we changed out the coil. So we will give this a try. Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1991 Honda civic [ 0 Answers ]

How do I check if my fuel injector's are working?

1991 honda civic si [ 0 Answers ]

1991 honda civic park lights turn off when I lower the hand break. Running lights not working.

1991 honda civic code 16 [ 1 Answers ]

Hi, I have problems with my car and it shows up code 16 and I would like to know where is the main relay for the fuel injector. I changed the computer and I still don't have a sign it still shows code 16. What could it be? Please help

Trouble Code 1991 HONDA civic wagon [ 1 Answers ]

How do I get the trouble codes off a 1991 honda civic wagon?

1991 honda civic dx [ 1 Answers ]

thank you for the replies to my previous question. I do intend to change the trany fluid n filter. There's sum minor things that need to be done like new plugs n wires. I've noticed a small missfire in a cylinder but no biggie. I've tried searchin the net but haven't had good luck finding what the...

View more questions Search