Check out some similar questions!
Harbor breeze ceiling fans troubleshooting
[ 0 Answers ]
My relatively new Harbor Breeze ceiling fan was working fine until a few months ago. When we turn on the fan/light from the wall switch the lights blink. Sometimes we can get it to stop by pulling on the pull chain a few times. It's rather annoying and happens often. Please help.
Harbor breeze ceiling fans troubleshooting?
[ 1 Answers ]
Purchased a Harbor Breeze 52" model very similar to the Elevation Brushed Nickel. The batteries went dead in the remote and after replacing them there is no communication between the remote and the fan.the dip switches match. Any suggestions?
Harbor breeze ceiling fans troubleshooting?
[ 2 Answers ]
I have had my Harbor Breeze Fan for approximately 6 years. Recently it started making a noice (like loose bearings - if that makes sense to you). Suddenly, my fan stopped working. The lights inside the casing and in the light kit are working but the fan doesn't work at all. I love the fan and...
Harbor breeze ceiling fans troubleshooting
[ 5 Answers ]
Our fan and light worked fine up to about three months ago when the light stopped working. I removed the bulb, thinking it needed replacement but it looked fine. It was tested at the hardware store and they confirmed nothing is wrong with it. Remote shows ability to adjust level but nothing...
Harbor breeze ceiling fans troubleshooting
[ 1 Answers ]
I have a harbor breeze ceiling fan that has a remote and no pull chains it was working fine until I blow a breaker in the room, fan works but light won't come on. Changed all three bulbs one was blown and just got a little flicker in one or two light bulbs but light still won't work help please View more questions Search
Add your answer here.
|