Ask Experts Questions for FREE Help !
Ask
    rebullen's Avatar
    rebullen Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 3, 2007, 07:52 PM
    Toilet Vents?
    I want to remodel/replumb an old bathroom and put in a new bath about 15 feet from where the drain pipe exits through the basement wall. The pipe is about 2 feet above the basement floor. The only vent that I see is in the yard on the septic tank! I would like to properly vent the toilets,tub,vanity and showers. What is the best way to connect to the exit pipe and where is the best placement for the Vent(s)? The minor fixtures will all be upstream from the toilets. The old bath has cast iron and I plan on replacing it.
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
     
    #2

    Mar 3, 2007, 09:11 PM
    I am guessing you will be installing some kind of lift station or sewer ejecter? Without looking at the existing piping it will ne nearly impossible to give you good advice.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Mar 4, 2007, 10:03 AM
    Quote Originally Posted by rebullen
    I want to remodel/replumb an old bathroom and put in a new bath about 15 feet from where the drain pipe exits through the basement wall. The pipe is about 2 feet above the basement floor. The only vent that I see is in the yard on the septic tank! I would like to properly vent the toilets,tub,vanity and showers. What is the best way to connect to the exit pipe and where is the best placement for the Vent(s)? The minor fixtures will all be upstream from the toilets. The old bath has cast iron and I plan on replacing it.
    Most bathroom groups are roughed in like this.
    Toilet connects to sewer main. The toilet wet vents through the lavatory vent. Lavatory connects to toilet drain and runs a vent off the top the stubout tee out the roof or revents back into a dry vent in the attic.. The shower/ tub connects to the lavatory drain and is wet vented by it. This is a normal rough in and is acceptable both by local and state codes but also The Standard Plumbing Code Book. Good luck, Tom
    rebullen's Avatar
    rebullen Posts: 2, Reputation: 1
    New Member
     
    #4

    Mar 4, 2007, 11:04 AM
    Thanks for the help!
    I forgot to include the info that the baths are bothe on the first floor hence above the drain exit. Should I place the stack vent over at the new bath 15 feet away or the old bath 8feet away or would it be better to place it over the drain xit area. I would like to use only one vent for the whole project.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why are there vents? [ 1 Answers ]

:confused: Okay, it looks like moving the toilet is way beyond my diy skills right now. So I am back to the original plan of just moving the supply lines. Ripping the drywall off has revealed even more interesting things. The cold water pipe looks like that mousetrap game with more turns than a...

How to Clean Vents? [ 1 Answers ]

Hi. We moved into a 45 year old home last summer. It has gas heat and central A/C. I doubt the vents have ever been cleaned. Is there a method to cleaning vents that can be done by the homeowner or does it need to be cleaned by a professional?

Auto vents [ 3 Answers ]

Tom, thanks for the info on the shower drain. Its greatly aprreciated. I am also installing a kohler wirlpool tub in my new bathroom. Question is this. The tub is going to be in middle of the room. What are your recommendations for venting the drain line? The drain line will travel appr. 11 feet...


View more questions Search