Check out some similar questions!
Coleman Presidential Gas Furnace Series 7900 blower
[ 3 Answers ]
I recently purchased a mobile home and know nothing about maintaining it. The weather is turning cold and I do not know how to make my furnace work. I turn the thermostat to heat and set the temp but nothing happens. I checked it and the pilot light is lite and stays on, but, the furnace does...
My blower fan/furnace motor on my natural gas/air conditioning system short cycles?
[ 1 Answers ]
This summer I had my air conditioning unit replaced after the previous one unknowingly froze up and as a result blew up. The new unit was working well after it was installed in conjunction with the natural gas furnace without issue - albeit the blower on the furnace unit distributes the cold air...
In the Air Furnace (Coleman TD729), where to find the location for the Blower motor s
[ 1 Answers ]
Old Air furnace TD 729 from Coleman, I would like to know the location for the starting capacitor for the motor blower to be able to replace it. Thanks jfarjo
Two-zone EWC-ST-2D gas hot air and air conditioning furnace
[ 0 Answers ]
I have a two-zone EWC-ST-2D gas hot air and air conditioning furnace. With two RITETEMP 8050 thermostat controls mail level and the other is upstairs. Is the C wire the other side of the 24VAC heating transformer because the 8050 can run on 24VAC series power. 24VAC ONLY. Power for the...
Blower to Furnace and Air Conditioning
[ 1 Answers ]
My blower (I am assuming) that circulates air from my furnace and AC is making a ringing noise. I shut the AC off; but after a couple hours I started getting a ringing noise from the unit, so I shut it off from the main switch. The next day, I was able to run the AC for a while; but because I... View more questions Search
Add your answer here.
|