Ask Experts Questions for FREE Help !
Ask
    Joe Davis's Avatar
    Joe Davis Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 15, 2012, 04:06 PM
    Recoil starter stuck on new mower
    Just bought new mower. Took it out of the box. Recoil starter rope will not release.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jul 15, 2012, 04:55 PM
    Take it back to the store or at least tell us brand and model.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kohler mower recoil starter rope won't rewind [ 1 Answers ]

I have a Husqvana lawn mower with a Kohler Courage XT-6/XT-7 (173 cc) vertical crankshaft. The starter rope broke. I removed the old rope. Most how to instructions indicate that the rope pulley should be turned counter-clockwise until it becomes difficult to turn before threading the new rope...

Toro lawn mower 200016 recoil starter is stuck. I am unable to pull the chord. [ 0 Answers ]

I have a Toro lawn mower 200016 recoil starter is stuck. I am unable to pull the chord anymore. Prior to now, there have been instanced where the chord would not retract. However, as of today, it will no longer allow me to pull it out. Any ideas?

Recoil starter [ 1 Answers ]

How to repair recoil starter for a 6.5 tecumseh engine on walk behind mower. It has two pawls that I can't get to work. The fall out on first pull of rope? Thanks bullrun . Great site

Recoil starter won't work [ 1 Answers ]

Hello, I have an old Lawn core aerator made by Aquafier in PA. I am currently having a problem with the recoil starter where it extends fully when pulled and retracts fully when you release tension on the rope. However, the action of pulling the rope does not engage or turn the engine in the...

Reassemble Mower starter cord recoil [ 1 Answers ]

My mower's power cord looked like it was about to break. So I purchased a replacement cord and sought instructions on the web. Unfortunately the instructions I found weren't consistent with the design of the Briggs and Stratton engine on my mower. The instructions show how to replace a coed...


View more questions Search