Ask Experts Questions for FREE Help !
Ask
    clb77581's Avatar
    clb77581 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 6, 2010, 04:18 PM
    Kohler mower recoil starter rope won't rewind
    I have a Husqvana lawn mower with a Kohler Courage XT-6/XT-7 (173 cc) vertical crankshaft. The starter rope broke. I removed the old rope. Most how to instructions indicate that the rope pulley should be turned counter-clockwise until it becomes difficult to turn before threading the new rope on. When I turn the pulley, there is no tension or recoil. I tried to thread the new rope on anyway, but of course there was no recoil or tension when I tried it out... the rope would not go back into the mower after it was pulled. Does anyone know how to wind the spring on the Kohler engine so I get recoil on the starter rope?

    Thanks,
    CB
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Jun 6, 2010, 08:12 PM

    Sound s like the recoil spring is broken.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toro lawn mower 200016 recoil starter is stuck. I am unable to pull the chord. [ 0 Answers ]

I have a Toro lawn mower 200016 recoil starter is stuck. I am unable to pull the chord anymore. Prior to now, there have been instanced where the chord would not retract. However, as of today, it will no longer allow me to pull it out. Any ideas?

Recoil starter [ 1 Answers ]

How to repair recoil starter for a 6.5 tecumseh engine on walk behind mower. It has two pawls that I can't get to work. The fall out on first pull of rope? Thanks bullrun . Great site

Reassemble Mower starter cord recoil [ 1 Answers ]

My mower's power cord looked like it was about to break. So I purchased a replacement cord and sought instructions on the web. Unfortunately the instructions I found weren't consistent with the design of the Briggs and Stratton engine on my mower. The instructions show how to replace a coed...

Starter Rewind repair Briggs and Stratton [ 2 Answers ]

I have a Briggs and Stratton 3.75 Spirit motor Model 98902 Type 0131 with a broken recoil spring. I can rewind the cord by hand and still start the motor. However after a year and a half of that I figure it's time to fix this! I am mechanically sound but wanted to know if there is anything I...


View more questions Search