Ask Experts Questions for FREE Help !
Ask
    GGucken's Avatar
    GGucken Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 15, 2012, 12:07 PM
    Wisconsin plumbing code for roof vent height
    Home inspector said I have to raise the plumbing roof vent pipes. They are 6" above the roof but are no where near the peak. House is 40 years old and they have never been a problem even with heavy snow.

    Thanks

    Gary
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 16, 2012, 07:48 AM
    Quote Originally Posted by GGucken View Post
    Home inspector said I have to raise the plumbing roof vent pipes. They are 6" above the roof but are no where near the peak. House is 40 years old and they have never been a problem even with heavy snow.

    Thanks

    Gary
    Hey Gary,
    Here's what the code calls for,

    12.4 VENT TERMINALS

    12.4.1 Extension Above Roofs

    Vent pipes shall terminate not less than 6 inches above the roof, measured from the highest point where the vent intersects the roof. EXCEPTION: Where a roof is used for any purpose other than weather protection, vents shall extend at least 7 feet above the roof and shall be properly supported.
    How much does the inspector want you to raise the bents? Let me know. Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Proper height of stack vent through roof [ 6 Answers ]

Greetings, I am remodeling my house and have just finished roughing in a new bathroom. I am at the point now where I'm ready to extend the stack through the roof. I'm trying to figure out how high the stack needs to be. I seem to remember that the proper stack height was reached by using...

Plumbing laundry tub installation Wisconsin code [ 2 Answers ]

Can I run a tub drain into the 1 1/2 vent pipe and use a loop vent? or would I have to open up the floor and install a drain in the existing drain and than install a loop vent?

Plumbing vent height above sloped roof [ 6 Answers ]

How high should the plumbing vents be above there roof? I have a main vent and a sink vent and both are only 6" high above the roof. The slope is about 4" high for every 12" horizontal. Thanks John G.

Roof Height of toilet vent [ 2 Answers ]

I am in the process of adding a toilet to a former porch/pantry in an older home and was wondering if the toilet vent height needs to be at the highest point of the roof, or can I vent it through the roof of the porch/pantry. There are a number of windows on the second floor and I do not want to...

Height of roof vent [ 7 Answers ]

My mother ( does not live close to me) is complaining of a smell in her basement around the area where there is a basement sump pump to pump out water that may seep into the basement. There was a service person out today and they told her it was most likely because the roof vent was not high...


View more questions Search