 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi,
There should be a snap-in/on cap at the center of the wheel. Beneath it should be a nut and a couple of washers. Remove them and see if the wheel will pull up and off. If not, you may need a penetrating lube to attack the rust/corrision. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The steering clicks when attempting to turn left on our Troy-Bilt Super Bronco Lawn Tractor. We are trying to remove the pinion and steering column to check the parts for damage. What is the best way to remove the pinion gear after you've removed the bolt and washer holding it on? Do we need to...
I have last years troy built 42 inch mower, and the small gear that is on the shaft to the steering wheel is in bad shape and needs replaced. Where do I start to get the gear off ? Any help would be much appreciated.
I have a troy-bilt riding mower and it sometimes gets stuck in gear and wants to keep moving whether it be forward or backward.
I'm having problems with the steering on my troy bilt mower. It turns left OK but when you go to turn right it seems the steering gears are not connecting. I sent it in to change the d upper and lower drive belts and they also changed a couple of pulleys. When I got it back the steering seemed...
View more questions Search
|
