Ask Experts Questions for FREE Help !
Ask
    vansellers's Avatar
    vansellers Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2012, 05:20 AM
    Snapper rear eng. Riding mower M281019BE
    I replaced the drive disc thinking it was the problem but when I move the shifter to reverse the chain case moves and comes back to neutral but it will not move to 12345 it sticks . I find no burrs on the octagon axle although I have cleaned it .
    vansellers's Avatar
    vansellers Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jul 14, 2012, 04:36 PM
    Snapper Rear Engined Riding Mower
    Snapper, M281019BE
    I replaced drive disc hopoing that was my problem but that didn't help. The chain case will slide to reverse and will back up and slide forward to neuteral and will not go into forward. Octogon shaft has no burrs and has been cleaned. Chain case slides one way but not the other. I can drive mower in reverse but not forward. I appreciate any help. Thanks-Van
    vansellers's Avatar
    vansellers Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jul 15, 2012, 05:55 AM
    -snapper m281019BE run inreverse but not ahead
    Put newdrive disc on no help the chain case will slide to reverse and netural but will not go to 12345 . Tap with hammer it sticks and had to tap it back to nuteral the shaft has on burrs and is clean run good in reverse but chain case will not move to the ahead spot.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rear wheels won't move on snapper riding mower [ 1 Answers ]

The rear wheels on my snapper mower locked up and will not turn in either direction. Does anyone have an idea as to what the problem may be and how to fix it?

How can I make a go kart from a snapper rear engine riding tractor? [ 0 Answers ]

The tractor still has the clutch and rear end/ transmission still attached. I am using a Horizontal shaft engine. Should I use chain or v-belt? Then how do I hook this all up And make it work? What partsdo I need, an what modification do I need to make?

REplace Rear Axile Bearing in Snapper Riding mower [ 1 Answers ]

I need to replace the rear axile bearing in my Snapper 28" Hi Vac Rear Engine Riding Mower.Model 28088T I have taken the back wheels off trying to get the axile out and I can't get it out can you tell me how/

Snapper Rear Engine Riding Mower Series 21 [ 1 Answers ]

Engine will not start, no fire, and I need to know the location of the fuse. Ted

View more questions Search