 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower problems
I have problems with fluctuation of flow at certain times.
I am on an economy seven system with my power supply. I find that before the economy seven stops then my spray is at very minimal ,at about half power or later in the day a fully normay spray that reaches easily to to rear of the bath. If the washing machine is on cycle then spray is down to half or less, I presume that the problem is that the water flow is the cause but the house has a very strong water pressue. Would be obliged if some answers to help would be appeciated Regards |
||||
Check out some similar questions!
When I first started using my showers, they would turn on as normal. Now, When I turn the hot water on and then turn the shower knob to turn the shower on, it does not come on. I turn the shower knob back off and turn it on again... still nothing. After a few more of and on movements, if will...
I need to try and figure out what's wrong with my shower. When I run the water faucets (cold and hot), and I have the right temperature set everything seems fine. But when I use the shower head I have to adjust the water faucets to the point where there is little cold water running but the hot...
I had the hot water side on my shower break. I got the new parts the are Delta and now it won't go back together it is like it won't go in far enough to lock in. Any idea what is going on?
Hi I got a new shower fitted a couple of days ago and when I am using the shower it sometimes goes really hot and then really cold when I have not touched the temperature thanks for your info xx:mad:
Hi, About 3 months ago, Speedball helped me install a new Moen 1225 cartridge in my shower. It's been working great. However, within the last week or so, my shower has developed a strange symptom. About half the time I shower, for the first two-three minutes I can't get the water cool enough...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
