Ask Experts Questions for FREE Help !
Ask
    robertnshields's Avatar
    robertnshields Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2012, 05:59 PM
    My DSC PC1832 will not go into the Function menu when I press * or *1 per the manual.
    Alarm system will not go into Function mode when manual instructions are followed. Help. Thanks.

Check out some similar questions!

Dsc-pc1832 [ 1 Answers ]

How to progarm dsc PC 1832

Dsc pc1832 [ 1 Answers ]

I am installing a DSC PC1832 in my home. I have four 4-wire leads for five Smoke Detectors. Can I place all four common leads with two each on the PGM1 & PGM2 terminals?

Dsc pc1832 program function key [ 7 Answers ]

I have a dsc PC 1832 no matter what I do my function key to arm my system while I'm at home is still on a delay I want it on instant I put the code correct in section 001 and 005 partition 01 and ideas

Prgramming the DSC PC1832 [ 3 Answers ]

I bought a PC1832 which gave me a big headache and spent one full Saturday without success. I connected the hardware but had major issue programming the system. Due to incorrect data entry, I believe the system locked up and all what I see is a symbol of keypad on the screen and --:--. As soon as I...

Programming manual dsc pc1832 [ 2 Answers ]

I am looking for a programming manual for a dsc pc1832. Could anyone point me in the right direction. Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.