Ask Experts Questions for FREE Help !
Ask
    MTJ's Avatar
    MTJ Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2012, 05:06 PM
    Changing lights in garage
    From the ceiling only 3 wires -- white, black, and bare ground

    From the new fluorescent light ballast white, black, bare and red

    What to do with the red?
    summit2112's Avatar
    summit2112 Posts: 3, Reputation: 2
    New Member
    		  
    #2

    Jul 9, 2012, 07:59 PM
    Should have wiring diagram on ballast.. how many bulbs and what size are they
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing the signal for a craftsman garage remote for car [ 0 Answers ]

I lost one remote for the craftsman garage door opener and want to make sure if someone finds it they can't enter the garage as it is attached to the house. How can I reprogram the garage opener and make sure the original signal for the remote is cleared. I changed the PIN on the keypad.

5 lights in my garage [ 3 Answers ]

I have 5 lights in my garage, I just changed two of the lights bulbs that were blown and replaced them with two new bulbs. Now the lights are dim and after about 5 seconds it is triggering the circuit breaker and killing all power to the garage and restroom on that circuit. It seems power is...

Exterior garage lights [ 1 Answers ]

"Hello, I want to have 2 exterior garage lights controlled by the garage door opener(GDO)so that the exterior lights come on when the GDO light comes on. But, I would also want the same 2 exterior lights controlled by a wall switch independently from the GDO. Thanks"

Spacing for outdoor garage lights [ 1 Answers ]

I am from Carlyle, SK Canada. We are in the process of building a 30 x 30 garage. We would like to have 4 recessed pot lights along one side that will shine down. How should these be spaced? Should they be equally spaced along the 30 feet or should they somehow be positioned above the garage...

Garage door opener lights won't come on? [ 3 Answers ]

I have an alliance genie garage door opener ( Model # 600), which holds two light bulbs, when operating the garage door up and down niether light bulb will come on. I removed the exterior housing from the unit and checked all wiring connections everything seems to be OK? What do I look for next?

View more questions Search