 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rudd heat pump frozen
Started having issues with a heat pump about 2 months ago. Got up this morning with it AC running but not blowing air. Made sure it was cleaned out and filters in the house are changed twice a month. Removed the panels from the right side of the unit and found the, what looks like a radiator filter, I large metal compressor (I think) filthy. Looks like it was never cleaned when serviced. The individual rolls look folded in had to open a lot of them up. What needs to be done?
|
||||
Check out some similar questions!
Rudd heatpump that use r410 refrigerant pressure OK in heat mode but pressure low in cooling mode
8 year old Ruud heat pump cools home during evening, night, and early morning, but blows hot air during the hottest part of the day. If I turn it off for about 30 min. then turn it back on, it will cool for about 15 min. and then start blowing hot air. Tech says compressor windings are bad and...
Could it be the wrong thermostat the unit model uqka a030jk the heat pump 7f62 heater kitrxqj
Our inside unit runs but the fan outside isn't turning. Also of course the house warms up when the auxiliary heat is turned on. Our HVAC guy said it may have been tripped, but my husband looked on the exterior unit and doesn't see a reset switch or fuse?
My unit is a Rudd model# UPGB-025JAZ, 208/230 volts year 1997 I believe I have a single pole contactor with a 24 volt coil.. PS thanks for hanging in their with me!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
