 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We have a 2 year old rudd heat pump and the outside fan isn't working
Our inside unit runs but the fan outside isn't turning. Also of course the house warms up when the auxiliary heat is turned on. Our HVAC guy said it may have been tripped, but my husband looked on the exterior unit and doesn't see a reset switch or fuse?
|
||||
Check out some similar questions!
My heat pump works fine in both the first and second stages, but when the temp in my home reaches the temp set on thermostat the heat stops but the fan never does. It just starts blowing colder air until I set the temp down further or just turn off the heat. I don't mean blow for a few minutes but...
I have a goodman heat pump it will work in cooling mode but not heating. When I put in heating mode the air handler will kick on and the back up heating stripes work but the heat pump does nothing. I have replaced the transfomer on the air handler when it burned up and also replace the contactor...
I have a coleman heatpump and the other day the fan out side quit running. Someone came out and replaced the relay switch. Worked fine for a few hours, Then it shut off again but the inside fan kept running until I cut it all off. Any suggestions?
Heat strip not working on my goodman heat pump
My unit is a Rudd model# UPGB-025JAZ, 208/230 volts year 1997 I believe I have a single pole contactor with a 24 volt coil.. PS thanks for hanging in their with me!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
