Fan intermittently cuts out when mechanical thermostat is in on position

gpabian Posts: 1, Reputation: 1

New Member

Jun 26, 2012, 10:00 PM

Fan intermittently cuts out when mechanical thermostat is in on position

I have an Honeywell mechanical thermostat. When the switch is in the on position, the fan will eventually cut out. When I have it on auto, it continues to start and stop with heating and cooling, no issues. Is this solely a thermostat issue, or is there more to it? I am thinking I just need to replace the thermostat. Looking for feedback. Thanks.

Check out some similar questions!

My furnace fan won't run in the fan on position on the thermostat. [ 10 Answers ]

My furnace fan won't run in the fan on position on the thermostat. I don't know the model number but my furnace is a Trane high efficiency with variable speed DC motor about five or six years old. It seems to be working OK in the auto position. It's keeping the house warm but I have an HRV and...

Minka Ceiling Fan power to fan cuts on and off, light will work. [ 0 Answers ]

My Minka ceiling fan will start when turned on and work fine for 5 minutes then the power cuts off and the fan begins to shut off. Just as you think the fan is completely shut off it starts back up on its owns. It will continue to do this at different intervals, maybe it takes a couple minutes...

Ceiling fan works in the clockwise position but not in the counterclockwise position [ 1 Answers ]

Our ceiling fan (circa 1998, Gulf STream Model 978A/five blade) has the typical switch on the side of the housing to enable the fan to go clockwise or counterclockwise. Counterclockwise works at all three speeds. Clockwise does not work at all. Gives no indication (motor noise) that there is any...

Replacing mechanical thermostat with programmable [ 1 Answers ]

I'm looking for help from labman or any experienced HVAC person... here goes... I recently purchased 2 Honeywell Focus Pro 6000 programmable model TH6110D1005 thermostats (I have 2 zone heating). I'm a replacing a mechanical honeywell dial mercury thermostats (Probably about 20 years old or...

HELP! 95 civic ex barely starts, cuts out intermittently [ 4 Answers ]

Hi all. Having a problem with my 95 Civic EX. Idles beautifully when it starts, but cuts out when you step on the gas, especially if you step on it hard. If you step softly on the gas you can slowly manage to get around to a quick location, but when the car heats up it is almost impossible to...

View more questions Search

Check out some similar questions!

Add your answer here.