 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Minka Ceiling Fan power to fan cuts on and off, light will work.
My Minka ceiling fan will start when turned on and work fine for 5 minutes then the power cuts off and the fan begins to shut off. Just as you think the fan is completely shut off it starts back up on its owns. It will continue to do this at different intervals, maybe it takes a couple minutes before it repeats this power problem, or it might take a half hour, either way it does continue and this just started 2 days ago. Any help would be appreciated.
|
||||
Check out some similar questions!
I recently purchased a minka aire ceiling fan which has the fan control switch and receiver. I wired the room awhile ago and used a 3-way wire to the fan so I could have a switch for the light and a switch for the fan. What I want to do is "hide" the minka aire controls somewhere (we have an old...
Hello, My name is Pete and I am stumped. I put up a Minka ceiling fan and it came w/ a wall control to power both the light and fan. I wired it per instructions and reset the frequency for the wall control, turned the power on, held the button per instructions. Some lights came on the control for a...
I have an old ceiling fan. It was in the house when I bought it so I have no info on it. There are no tags or model #s on it. It is controlled by 2 separate wall mounted switches. One light dimmer and one fan speed controller. I wanted to update the light fixture on it so I removed it. Wiring...
We just installed a new ceiling fan with light and the fan does not work the light does but not fan
I have a Harbor Breeze ceiling fan with lights and remote control. Due to a problem with my air conditioning unit, the power in the house shut off. After power was restored, the fan lights only work by pulling the chain but the fan blades do not work by pulling the chain or using the remote. What...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
