Ask Experts Questions for FREE Help !
Ask
    Wkeck's Avatar
    Wkeck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2012, 01:06 PM
    Kohler K3402 flapper replacement 83064 doesn't work
    I replaced my defective K3402 flapper with # 83064 but it doesn't sit properly and seal unless I manually move it. Any suggestions?
    Thx!
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jun 24, 2012, 01:39 PM
    Is the ring still connected to your flapper? If so, cut the ring off and try again.

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What Hampton Bay replacement remote will work for model UC7078T? [ 5 Answers ]

I have been trying to find a replacement remote for months for this ceiling fan, since dogs ate last one, does anyone know if a Hampton Bay remote with the sku #191-691 will work? It is on eBay and sealed and the guy doesn't know if it has DIP switches or not. Help! I am tired of hitting toes on...

Cv680-3016 kohler set the timing on a kohler lawn mower engine? [ 0 Answers ]

I need to set the timing on a Kohler 674cc lawn mower engine I sent the heads out to get cleaned and now I need to reassemble but I don't want to screw it up so if anyone knows the timing or how to set the timing I'd appreciate it Serial# 380 700 2111 Spec# cv680 - 3016 Family...

Toilet flapper won't stay down. It flushes, flapper seats then bobs back up in a sec [ 11 Answers ]

I have shortened the chain, lengthened the chain etc. It finally flushes O.K. & the bowl clears if I hold the handle down for a little bit, the flapper seats then bobs back up and has to be manually pushed down, then it stays. It is a new flapper

Kohler engine replacement [ 4 Answers ]

Broken rod in Kohler courage sv600s engine. New engine on order. Question is how do I get the pulleys, elec pto switch, etc off the old shaft? I did see illustrated instructions on this somewhere but can not find it now that I need it. Please help, Thanks

Replacement Kohler Plastic Shower Handle [ 1 Answers ]

Older plastic single handle shower handle is broken. Where/how can I find a replacement handle?

View more questions Search